Screens show colour differently. A sample shows you the real thing.
$54.98/m²$64.29/m²Save 14%
$78.62 per boxor 4 payments of $19.65 with Afterpay
Choose your colour Snow Grey
Compare Snow Grey with another floorKnow your boxes and total.
1.43 m² / boxFor a rectangular room, multiply length by width.
Up to 3 colours, $15 flat shipping.
Film your finished floor, get $100 back
Airtasker's Preferred PartnerNeed it installed? $30 off install.As Airtasker's preferred flooring partner, we make installation easy: hire a rated, insured local installer and compare upfront quotes in minutes, floor and fit sorted in one go.
$30 off. Buy your flooring from us and we'll give you a $30 coupon for your Airtasker installation job, just contact us with your order number.
Learn more about our partnershipProduct details
Snow Grey herringbone pairs the season's coolest neutral with flooring's most timeless pattern – quiet luxury for modern apartments and crisp contemporary builds. Premium 9.5mm water resistant construction keeps every angle sharp and every room fair game.
Order free samples to mock up the pattern at home – herringbone decisions deserve a dry run.
The specifications
The 7.5 mm board has 2 mm of attached underlay, making 9.5 mm overall. The board gives a firm base; the underlay adds comfort underfoot and helps soften footstep noise. Check the acoustic rating for its tested sound performance.
Each plank is 63 cm long and 12.6 cm wide. Longer, wider planks mean fewer joins across the room. Mark these measurements on your floor to picture the layout.
This is the floor area that one full box covers. One square metre is a square 1 metre long and 1 metre wide. Allow extra for cuts, then round up to whole boxes. The calculator above does this for you.
The edges lock together to form one joined floor. This makes fitting boards simpler and keeps the joins lined up. Leave the edge gaps in the installation guide so the floor has room to move.
The clear wear layer protects the timber-look design from everyday foot traffic. At 0.5 mm, it is a durable choice for busy homes. It helps prevent the pattern wearing away; felt pads still help prevent scratches.
This protective coating is hardened with UV light at the factory. It helps protect against daily wear and makes routine cleaning easier. Follow the care guide when choosing cleaners.
Each board has a tiny sloped edge. A 4-sided micro bevel puts this edge on all four sides, making a fine outline around each plank once laid.
This lists what comes in one box, such as the number of boards and the area they cover. Where a weight is shown, it is useful for planning pickup, carrying and storage. Left and right boards, when listed, form a matching pattern.
Tested at 5 stars for footstep noise, a useful option for apartment living. If your body corporate asks for 5 stars, submit this report for approval. It must suit your building and the planned floor and underlay setup.
P2 is a grip-test rating to consider for dry indoor spaces such as bedrooms and living rooms. Spills still need wiping up. For stairs or wet areas, check the product and required rating with your installer.
This shows how the floor performed in a fire test. A higher CHF number means a better result in that test. It does not mean the floor cannot burn. Your builder can check the test report for your project.
SPC means Stone Plastic Composite: a firm limestone-and-plastic core with a timber-look surface. Our SPC hybrid range is silica-free. Follow the cutting guide and control dust during installation.
Short rectangular boards meet in a zigzag pattern. The ends meet the sides of other boards. Plan the layout and cutting allowance with your installer.
We will work quickly to ship your order as soon as possible. Once your order has shipped, you will receive an email with further information. Delivery times vary depending on your location.
Our products are manufactured both locally and globally. We carefully select our manufacturing partners to ensure our products are high quality and a fair value.
Matching trims
Still deciding?
Board build, plank size, sound ratings and price per m², two floors side by side.
Herringbone instantly creates a focal point. Entries, hallways, living rooms and open-plan spaces look more considered when the floor becomes the design feature, and the zigzag pattern adds a sense of occasion without any extra styling.
You get the sharp designer pattern of a parquetry floor on a hybrid surface that’s 100% water resistant, scratch resistant and easy to live with. No sanding, staining or special products, just regular vacuuming and mopping.
A 7.5mm SPC core with a 2mm underlay already attached gives a solid, stable feel, and the 9.5mm build rated AAAC 5 star (L’nT,w 41, FIIC 69) in independent acoustic testing. The range comes in 6 colours, from Snow Grey to Pacific Spotted Gum.
This hybrid floor combines a timber-look decor layer, rigid SPC core and attached underlay. Read the installation, maintenance and warranty documents to check that it suits your room and floor build-up.
The linked safety data sheet reports zero respirable silica dust content. Refer to the current SDS under Product Downloads for the product’s safety and handling information.
The 9.5mm herringbone range is built for good looks and durability. The SPC core is water-resistant, but spills should be wiped up promptly and standing water avoided. Its 0.5mm wear layer is scratch-resistant; follow the linked care instructions for daily cleaning and protection.
New to SPC? Read what SPC flooring is and how hybrid handles water.
SIDE BY SIDE [CLICK-LOCK FLOORS]
Every floor below clicks together as a floating floor, so the choice comes down to pattern, board size and budget. Browse 9.5mm hybrid planks, 6.5mm hybrid or 12mm laminate.
| Spec | 9.5mm SPC herringbone (this range) | 9.5mm SPC hybrid plank | 6.5mm SPC hybrid | 12mm laminate |
|---|---|---|---|---|
| Core | 7.5mm SPC | 7.5mm SPC | 5mm SPC | 12mm laminate board |
| Underlay | 2mm, attached | 2mm, attached | 1.5mm IXPE, attached | Laid separately (tested on 2mm foam) |
| Board size | 630 x 126mm | 1820 x 228mm | 1540 x 182mm | 1216 x 197mm |
| Wear layer | 0.5mm | 0.5mm | 0.5mm | 0.5mm (AC4) |
| Acoustic rating | AAAC 5 star (L’nT,w 41) | AAAC 5 star (L’nT,w 41) | AAAC 4 star (L’nT,w 47) | AAAC 4 star (L’nT,w 49) |
| Slip rating | P2 | P2 | P3 | P2 |
| Fire (CHF) | >11.0 kW/m² | >11.0 kW/m² | >10.7 kW/m² | >7.1 kW/m² |
| Coverage per box | 1.43 m² | 1.66 m² | 2.24 m² | 1.917 m² |
Figures come from each range’s independent test reports, listed under Product Downloads on every product page.
Herringbone is the classic parquetry pattern: short rectangular boards laid at right angles in a zigzag. Our 9.5mm herringbone hybrid gives you that look on a 7.5mm stone polymer composite (SPC) core with a 2mm underlay already attached and a 0.5mm wear layer, in 630 x 126mm click-lock boards that lay as a floating floor.
Select rooms that meet this product’s installation, moisture and warranty conditions. The warranty excludes installations subject to potential water immersion, including bathrooms and areas with floor drains. Its AAAC 5 star (L’nT,w 41, FIIC 69) result describes the tested assembly; apartment and townhouse use still depends on the building’s acoustic requirements and approval. Check these conditions before choosing flooring for a kitchen or laundry.
Herringbone boards meet at right angles for a broken zigzag. Chevron boards are cut at an angle so the points form a continuous V. Our herringbone vs chevron guide shows the difference. Prefer a calmer look? The same 6 colours come in 9.5mm hybrid planks, so you can mix both in one home.
Herringbone takes more planning than straight planks. Set out from a centre line, expect more cuts at the walls and follow the herringbone installation guide under Product Downloads above. Handy DIYers can do it with patience, or ask about our installation partner. The subfloor needs to be clean, dry and flat, so start with our subfloor prep guide and the herringbone hybrid flooring guide.
Every colour in the range has matching trims, so the edges look as good as the floor: scotia for skirting lines, stair nosing for steps, T-mouldings for doorways and L-mouldings where the floor meets sliding doors or hearths. Browse all flooring accessories.
Each box covers 1.43 m². Herringbone needs more cuts than straight planks, so add 15% to your room measurements, then use our flooring calculator or the measurement guide.
Sweep or vacuum, then damp mop with a pH-neutral cleaner. No steam mops. The full routine is in our cleaning guide.
Not sure which colour? Order a sample, call us on 0431 311 633 or get a quote.
COMMON QUESTIONS [9.5MM HERRINGBONE]
Herringbone boards are rectangles laid at right angles, so the ends form a broken zigzag. Chevron boards have angled ends that meet in a continuous V. Both are classic parquetry patterns. See our herringbone vs chevron guide.
Herringbone is one of the best-known parquetry patterns. Parquetry is the general term for floors laid in a geometric pattern, and our 9.5mm herringbone gives you that look with click-lock hybrid boards instead of glued timber blocks. Read the herringbone hybrid flooring guide.
Often, yes. The 9.5mm build rated AAAC 5 star (L’nT,w 41, FIIC 69) in independent testing, which suits many strata buildings. Every building sets its own rules, so check your by-laws or send us your building’s requirements and we’ll help you check. The acoustic report is under Product Downloads above, and our apartment acoustics guide explains the ratings.
Yes, if you’re patient and handy. The boards click together as a floating floor, but herringbone needs a centre line, careful set-out and more cuts than straight planks. Follow the herringbone installation guide under Product Downloads above, read our herringbone guide, or ask about our installation partner.
Each box covers 1.43 m². Measure each room, add 15% for the extra cuts herringbone needs, then divide by 1.43 and round up. Our flooring calculator does the maths, and the measurement guide covers awkward rooms.
These boards already have a 2mm underlay attached. Do not add another underlay unless the product installation guide expressly permits the proposed system. Check any underlay or moisture-control layer against the guide, your subfloor and your building’s requirements before installation. Read our underlay guide for the questions to check.
The linked safety data sheet reports zero respirable silica dust content. Refer to the current SDS under Product Downloads for the product’s safety and handling information.
The linked product warranty excludes installations subject to potential water immersion, including bathrooms and areas with floor drains. A water-resistant core does not remove these room-use restrictions. Check the installation guide, care instructions and warranty under Product Downloads before choosing this floor for a kitchen, laundry or another room.
A clean, dry, flat subfloor. Concrete, timber and most existing tiles all work, but dips or humps need fixing first so the boards lock together properly and don’t move over time. Our subfloor prep guide covers what to check.
In most cases, yes. Hybrid floats over tiles as long as they’re flat, sound and firmly stuck down, which saves the cost and mess of ripping them up. Here’s how to lay hybrid over tiles.
Yes. The boards click to each other rather than to the subfloor, which is what makes it quick to lay and easy to repair. It also means heavy fixed items like kitchen islands need some planning. See cabinets and heavy furniture on a floating floor, how to replace a damaged board, or browse all our floating floors.
Yes. It’s scratch resistant, 100% water resistant and easy to clean, so claws and the odd accident are no drama as long as spills are wiped up reasonably quickly. More in can pets damage hybrid flooring, or see our pet friendly floors.
Sweep or vacuum regularly, then damp mop with a pH-neutral cleaner. Skip steam mops, oil-based polishes and harsh chemicals. Our cleaning guide has the full routine.
Yes. The same 6 colours come in 9.5mm hybrid planks, so you can run herringbone through the entry and living areas and planks in the bedrooms, then finish the join with a matching T-moulding.
Yes, and we recommend it. Colours look different in your own light, so order a sample before you buy. You can also call us on 0431 311 633 or get a quote for your whole project.
Reviews
New flooring’s a big decision. Our small, dedicated team makes it easy and enjoyable. Join hundreds of happy customers and love your home, one plank at a time.
Happy I found Hybrid Floors Australia for my reno, far cheaper than any other supplier. The team were awesome, answering all my questions and super prompt delivery. Product looks exactly as pictured online, great quality. Will be coming back when doing the bedrooms, 10/10 would recommend.
